43
Recommended Clearances to Combustible Materials
We recommend that the following minimum clearances be respected when installing your stove:
Chimney Height requirements
A chimney or vent shall be so designed and constructed to develop a flow sufficient to completely
remove all flue and vent gases to the outside atmosphere. The venting system shall satisfy the
draft requirements of the connected appliance in accordance with the manufactures instructions.
We recommend that the chimney be:
1. at least 90 cm higher than the highest part of the roof opening through which it passes,
2.
and
at least 60 cm higher than any part of the roof within 300cm, measured horizontally.
Due to prevailing winds, local terrain, adjacent tall trees, a hill or ravine near the home, or
adjacent structures, additional chimney height or a special chimney cap may be required to
assure optimum performance.
From stove to back wall
From stove to side wall
From stove to furniture
400 mm
300 mm
1000 mm
Summary of Contents for H33
