Net.DO
Lighting Control Equipment Co.,Ltd
http://www.netdo.com.cn
FOX1024s Moving Light Controller.
PAGE: 25
Example 3
：
Superpose shape
Each fixture can run up to 4 shapes together to achieve multiple graphics.
E.g.: Call circle together to make fixtures change colours like rainbow while circling.
Example 4
：
Use shape of “Force-Stop”
There is a Type of shape called “Stop”, which can be used to stop shapes between playback
programs. It can force to output a static scene when there are shapes running.
E.g.: No.2 fixture calls “Circle” in Playback 1.03, while it calls “Stop” in Playback 1.04. Run Playback
1.03 and then Playback 1.04, the running shape “Circle” will be forced to stop by shape “Stop”.
9. Program
This chapter will introduce every function of program and how to edit program. 300 programs
(including “Single-Step-Program” & “Multi-Step Program”) can be recorded, in 30 pages, 10 programs
each page, and controlled by 10 playback faders.
Program Number (
xx.xx)
, the first number before dot is the page number, the second one after dot is
the playback number in that page (Correspond to playback faders).
PROGRAM menu tree:
9.1
HTP and LTP channel
HTP channel
(HIGHEST TAKES PRECEDENCE): ----- output the “highest value first”
This type of channel obeys the rule of “highest value first”, which means only the one with highest
value will be output if multiple playbacks control a HTP channel at the same time. Dimmer channel
must be HTP channel.
LTP channel
(LATEST TAKES PRECEDENCE): ----- output the “latest value first”
This type of channel obeys the rule of “latest value first”, which means the last started playback will
be output and kept until next one started if multiple playbacks control a LTP channel at the same
time. Channels such as Pan/Tilt, Gobo should be LTP channel normally.
9.2
Empty LTP channel
When the value of certain LTP channel in a program is empty (no value), this channel will be ignored
in playback.
PROGRAM
EditStep
（
F1
）
FadeSync
(F4)
FadeTime
(F3)
