3.2.1 US Federal Communications Commission (FCC)
3.2.1.1 Class A Equipment
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Caution: Changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
3.2.1.2 T1 Equipment
Note: This equipment complies with Part 68 of the FCC rules and bears a label that
contains the FCC registration number. This information must be provided to the
telephone company if requested. This equipment should be connected to the telephone
network or premise wiring using compatible modular plugs and cabling in compliance
with the requirements of Part 68 of the FCC rules, using the following standard jack
types:
z
RJ-48H: TNE1500-P-12-XX or TAM1500-12
z
RJ-48C: TNE1500-X, TNE1520-X, UIM-T1 or UIM-2T1
In the unlikely event that this equipment harms the telephone network, the telephone
company can temporarily disconnect your service. The telephone company will try to
warn you in advance of any such disconnection, but if advance notice isn’t practical, it
may disconnect the service first and notify you as soon as possible thereafter. In the
event such a disconnection is deemed necessary, you will be advised of your right to file
a complaint with the FCC. Additionally, the telephone company may, from time to time,
make changes in its facilities, equipment, or operations that could affect the operation of
this equipment. If this occurs, the telephone company is required to provide you with
advance notice so you can make the modifications necessary to maintain uninterrupted
service.
Caution: This unit does not contain any user serviceable parts. Repair service and/or
warranty information may be obtained by contacting Customer Support at Net to Net
Technologies, Inc.:
z
Address: 112 Corporate Drive, Portsmouth, NH 03801
z
Phone: (603) 427-0600 / (877) 638-2638
z
Email/Website:
support@nettonet.com
/
www.nettonet.com
3.2.2 Industry Canada
3.2.2.1 Class A Equipment
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.
3.2.2.2 T1 Equipment
Notice: The Industry Canada label identifies certified equipment. This certification means
that the equipment meets telecommunications network protective, operational, and
220-0000084 rev 01
