QSG | Quick Start Guide: PB-ISDN
|
www.net2edge.com
14
5.9 Using Groups
When more than one port needs to be configured as a source or destination for calls, a
Group of ports can be set.
1.
Select
Add Group
from the
Add Routing Profile
screen.
2.
The
Group Configuration
screen is displayed.
3.
Name the Group you wish to configure.
Note:
The names of any Routing Profiles, Groups and Identifiers must not contain
the following characters: < > ~
4.
Use the
All
and
None
buttons to add blocks of PRI and BRI ports to the Group,
or select individual channels from each port by using the tick-boxes.
5.
Click
OK
to save the group.
6.
The new Group will now appear in the
SOURCE
and
DESTINATION
drop-down
menus. Select this Group from the drop-down to use it in a Call Routing Profile.
5.10 Finishing Configuration
Note:
Please remember to
Upload
when configuration of PacketBand ISDN
Chassis is complete. To upload, go to
File Upload
and wait until the progress
bar completes.
5.11 Additional Resources
All Net2Edge products and the DbManager application have their own User Manuals
which can be found in the 'Documents & Manuals' folder on the DbManager installation
disk or by registering at the Net2Edge website:
www.net2edge.com
For help with a specific problem, please click on the On-Line Help icon on the website,
or email a request to
support@net2edge.com
