QSG | Quick Start Guide: PB-ISDN
|
www.net2edge.com
4
1. Introduction
This document is a basic guide for configuring a new Net2Edge PacketBand ISDN. A full
User Manual for configuring all settings on the unit is supplied on the DbManager
Installation Disk.
2. Applications
The PacketBand ISDN range allows the delivery of synchronous ISDN, across
asynchronous IP networks. The product range covers both switched ISDN applications
and unswitched 'nailed' circuits. PacketBand will packetize traffic for transport across
the IP network and transparently depacketise it at a remote site. The traffic will then be
played out to the data interfaces.
PacketBand ISDN must be used as a two-ended solution, and an existing system can
easily be expanded with more PacketBand ISDN units to allow links to new sites and
devices.
3. Features
The PacketBand ISDN Chassis is available to support either 8, 16 or 32 PRIs. Each
product has the following features:
•
8, 16 or 32 PRI (E1 / T1 ports)
•
2 x SFP cages
•
2 x RJ45 UTP ports
•
1 x RJ12 asynchronous control port
•
1 x RJ11 alarm port
•
2 x RJ45 external clock inputs
•
2 x BNC external clock inputs
•
1 or 2 PSUs (AC or DC)
