QSG | Quick Start Guide: PB-ISDN
|
www.net2edge.com
7
5. Configuring PacketBand ISDN Chassis
Follow these steps to connect to PacketBand ISDN Chassis with DbManager and
configure the unit for use.
Configuration of PacketBand ISDN Chassis is carried out by setting up DbManager to
make a management connection, and then setting up the elements of PacketBand ISDN
Chassis in this order:
Device Settings
The unit-specific settings of the PacketBand ISDN
Chassis such as the
IP Address
and
Identifier
Clock Sources
configure which interface PacketBand ISDN Chassis is
to take synchronisation clock from a network, or
recovered clock from another PacketBand ISDN
Chassis
ISDN Ports
Each ISDN port can be individually configured with the
correct settings to interface with another device or
network
Link Configuration
Configure settings to carry ISDN channels across a
PSN between PacketBand ISDN units
Call Routing
Configure routes for the traffic PacketBand ISDN
Chassis will pass between connected devices and
networks
5.1 Connecting to the PacketBand ISDN Chassis
1.
Start up the DbManager Application
2.
Login as
Super User
(no password required)
3.
Four windows will be displayed:
Map
A network map showing Nodes
and Links between Net2Edge
devices
Terminal
A view of the communications
between DbManager and
PacketBand ISDN
Event History
All events which occur while
connected to PacketBand ISDN
Outstanding Events
Current Events
