MAX Command Reference Guide Network Utility Commands
114
25.9. DHCPD
This command sets up DHCP mode in console interface.
[Example]
SYS_NAME:/CONFIG/DHCP > DHCPD enable
Before DHCP daemon start, Check LAN link is alive....
>
OK! Link is alive...after 0 seconds
************* DHCP DAEMON START *************
Please, Wait a minute to find a DHCP server and allocate IP
SYS_NAME
:/CONFIG/DHCP> Finding DHCP Server.....(1)
===> Leased IP Address
= 165.243.134.103
===> Subnet Mask
= 255.255.255.0
===> Router address
= 165.243.134.254
===> Domain name server address = 165.243.140.230
===> IP Lease Time
= 2592000 sec
===> Server address
= 165.243.134.77
===> Broadcast address
= 165.243.134.255
===> Address Renewal Time
= 536870910 sec
===> Address Rebinding Time
= 536870911 sec
[Example]
SYS_NAME:/CONFIG/DHCP > DHCPD disable
DHCP Client Daemon is stopped
You have to set IP manually