b. Verify the
Restored
column shows
yes
for all authentication keys:
security key-manager
key-query
c. Verify that the
Key Manager
type shows
onboard
, and then manually back up the OKM
information.
d. Go to advanced privilege mode and enter
y
when prompted to continue:
set -priv advanced
e. Enter the command to display the key management backup information:
security key-
manager onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You’ll need it in
disaster scenarios where you might need to manually recover OKM.
g. Return to admin mode:
set -priv admin
h. You can safely shut down the controller.
Verify NSE configuration
1. Display the key IDs of the authentication keys that are stored on the key management servers:
security
key-manager key-query -key-type NSE-AK
After the ONTAP 9.6 release, you may have additional key manager types. The types are
KMIP
,
AKV
, and
GCP
. The process for confirming these types is the same as confirming
external
or
onboard
key manager types.
• If the
Key Manager
type displays
external
and the
Restored
column displays
yes
, it’s safe to shut
down the impaired controller.
• If the
Key Manager
type displays
onboard
and the
Restored
column displays
yes
, you need to
complete some additional steps.
• If the
Key Manager
type displays
external
and the
Restored
column displays anything other than
yes
, you need to complete some additional steps.
• If the
Key Manager
type displays
external
and the
Restored
column displays anything other than
yes
, you need to complete some additional steps.
1. If the
Key Manager
type displays
onboard
and the
Restored
column displays
yes
, manually back
up the OKM information:
a. Go to advanced privilege mode and enter
y
when prompted to continue:
set -priv advanced
b. Enter the command to display the key management information:
security key-manager
onboard show-backup
c. Copy the contents of the backup information to a separate file or your log file. You’ll need it in
disaster scenarios where you might need to manually recover OKM.
d. Return to admin mode:
set -priv admin
e. You can safely shut down the controller.
2. If the
Key Manager
type displays
external
and the
Restored
column displays anything other than
yes
:
a. Enter the onboard security key-manager sync command:
security key-manager external
sync
24
