Orange release button.
Caching module cam handle.
a. Press the orange release button on the front of the caching module.
Do not use the numbered and lettered I/O cam latch to eject the caching module. The
numbered and lettered I/O cam latch ejects the entire NVRAM10 module and not the
caching module.
b. Rotate the cam handle until the caching module begins to slide out of the NVRAM10 module.
c. Gently pull the cam handle straight toward you to remove the caching module from the NVRAM10
module.
Be sure to support the caching module as you remove it from the NVRAM10 module.
4. Install the caching module:
a. Align the edges of the caching module with the opening in the NVRAM10 module.
b. Gently push the caching module into the bay until the cam handle engages.
c. Rotate the cam handle until it locks into place.
Step 3: Add or replace an X9170A core dump module
The 1TB cache core dump, X9170A, is only used in the AFF A700 systems. The core
dump module cannot be hot-swapped. The core dump module typically is located in the
600