Orange release button (gray on empty FlashCache
modules)
FlashCache cam handle
a. Press the orange button on the front of the FlashCache module.
The release button on empty FlashCache modules is gray.
b. Swing the cam handle out until the module begins to slide out of the old NVRAM module.
c. Grasp the module cam handle and slide it out of the NVRAM module and insert it into the front of the
new NVRAM module.
d. Gently push the FlashCache module all the way into the NVRAM module, and then swing the cam
handle closed until it locks the module in place.
3. Remove the target NVRAM module from the chassis:
a. Depress the lettered and numbered cam button.
The cam button moves away from the chassis.
b. Rotate the cam latch down until it is in a horizontal position.
The NVRAM module disengages from the chassis and moves out a few inches.
c. Remove the NVRAM module from the chassis by pulling on the pull tabs on the sides of the module
face.
672
