8. Install 10 HDD drives into the top drawer.
9. Slide the drawer back in by pushing on the center and closing both levers gently.
Stop pushing the drawer if you feel binding. Use the release levers at the front of the drawer
to slide the drawer back out. Then, carefully reinsert the drawer into the slot.
10. Repeat these steps to install HDD drives into the other four drawers.
You must install all 60 drives to ensure correct operation.
11. Attach the front bezel to the shelf.
12. If you have expansion shelves, repeat these steps to install 12 HDD drives into each drawer of each
expansion shelf.
13. Proceed to the instructions for installing the SG6000-CN into a cabinet or rack.
SGF6024: Install 24-drive shelves into cabinet or rack
You must install a set of rails for the EF570 controller shelf in your cabinet or rack, and
then slide the array onto the rails.
What you’ll need
• You have reviewed the Safety Notices document included in the box, and understand the precautions for
moving and installing hardware.
• You have the instructions packaged with the rail kit.
Steps
5
