NETAVIS Observer 4.6 User Manual (October 2015)
Page 171 of 204
4.
Enter a name for this rule in the
Rule Name
text field.
5.
Next you choose and configure a
Trigger type
whereby NETAVIS Observer 4.6 currently supports
the following triggers:
a.
Motion detected
: In its basic configuration the trigger is any motion detection (option:
Any
definition
) on one or multiple cameras and/or camera groups which can be selected.
Additionally it is also possible to limit the trigger to only occur when any of the selected
iCAT Motion Detection definitions occurs (option:
Any selected definition
). When selecting
more than one camera then only the subset of identically named iCAT Motion Detection
definitions available on all cameras is shown here.
b.
Connection to camera lost
: You can select one or multiple cameras and/or camera
groups. The trigger is if NETAVIS Observer loses the connection to one of them.
c.
Connection to camera restored
: You can select one or multiple cameras and/or camera
groups. The trigger is if NETAVIS Observer restores the connection to one of them.
d.
I/O device port value changed
: You can select any I/O device which was previously added
via the I/O Device Administration (see
UNRESOLVED CROSS REFERENCEI/O Device
