background image

Web Graphical User In-

terface (GUI) for ESMS

161

If BMC Chipset type is AST2400 without RKVM, the Console Redirection, Mouse Mode, Remote

Session, and Virtual Media menu items are not visible.

8.3.2. Network Information

The Network Information of the device with the following fields is shown in the following table. To

edit the network Information, click 

Edit

.

Table 8.4. Network Information

ITEM

DESCRIPTION

MAC Address

Read only field showing the IP address of the device.

V4 Network Mode

The v4 network mode options are the following disable, static, or

DHCP.

IPv4 Address

The IPv4 address of the device (could be static or DHCP).

V6 Network Mode

The v6 network mode options are disable, static, or DHCP.

IPv6 Address:

The IPv6 address of the device.

8.3.3. Sensor Monitoring

Lists all the available sensors on the device.

The status column displays the state of the device as follows:

normal state

warning state

critical state

If you click on 

 the sensor page for that particular sensor will be displayed.

8.3.4. Event Logs

A graphical representation of all events incurred by various sensors as well as occupied/available

space in logs. Clicking on the color-coded rectangle in the Legend for the chart, allows to view a

list of specific events only.

Summary of Contents for Demos R130 M2








































































































































































































































































Reviews: