background image

 

 

12  

NP511 – 500Mbps Powerline Adapters User Guide 

 

www.netcommwireless.com 

v1.1 

Legal & Regulatory 
Information 

 
This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted 
under the Copyright Act, no part may be reproduced, stored in a retrieval system or transmitted in any form, by any means, be it 
electronic, mechanical, recording or otherwise, without the prior written permission of NetComm Limited. NetComm Limited 
accepts no liability or responsibility, for consequences arising from the use of this product. NetComm Limited reserves the right to 
change the specifications and operating details of this product without notice. NetComm is a registered trademark of NetComm 
Limited. All other trademarks are acknowledged the property of their respective owners. 

Product Warranty 

 
The warranty is granted on the following conditions: 

1.

 

This warranty extends to the original purchaser (you) and is not transferable;  

2.

 

This warranty shall not apply to software programs, batteries, power supplies, cables or other accessories supplied in or 
with the product;  

3.

 

The customer complies with all of the terms of any relevant agreement with NetComm and any other reasonable 
requirements of NetComm including producing such evidence of purchase as NetComm may require;  

4.

 

The cost of transporting product to and from NetComm’s nominated premises is your responsibility;- and,  

5.

 

NetComm does not have any liability or responsibility under this warranty where any cost, loss, injury or damage of any 
kind, whether direct, indirect, consequential, incidental or otherwise arises out of events beyond NetComm’s reasonable 
control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or military authorities, fire, floods, 
electricity outages, lightning, power surges, or shortages of materials or labour. 

6.

 

The customer is responsible for the security of their computer and network at all times. Security features may be disabled 
within the factory default settings. NetComm recommends that you enable these features to enhance your security.  

 
The warranty is automatically voided if: 

1.

 

You, or someone else, use the product, or attempts to use it, other than as specified by  NetComm;- 

2.

 

The fault or defect in your product is the result of a voltage surge subjected to the product either by the way of power 
supply or communication line, whether caused by thunderstorm activity or any other cause(s);  

3.

 

The fault is the result of accidental damage or damage in transit, including but not limited to liquid spillage;  

4.

 

Your product has been used for any purposes other than that for which it is sold, or in any way other than in strict 
accordance with the user manual supplied;  

5.

 

Your product has been repaired or modified or attempted to be repaired or modified, other than by a qualified person at a 
service centre authorised by NetComm; and, 6. The serial number has been defaced or altered in any way or if the serial 
number plate has been removed. 

Limitations of Warranty 

 
The Trade Practices Act 1974 and corresponding State and Territory Fair Trading Acts or legalisation of another Government (“the 
relevant acts”) in certain circumstances imply mandatory conditions and warranties which cannot be excluded. This warranty is in 
addition to and not in replacement for such conditions and warranties. 
 
To the extent permitted by the Relevant Acts, in relation to your product and any other materials provided with the product (“the 
Goods”) the liability of NetComm under the Relevant Acts is limited at the option of NetComm to: 

 

 

Summary of Contents for NP511














Reviews: