IFWA-661 Outdoor Wireless Antenna
–
Installation Guide
40 of 63
v1.0 September 20, 2019
© NetComm Wireless 2019
Latitude
Longitude
Height (Above Mean Sea Level
–
WGS84)
Azimuth (with respect to True North, not magnetic north)
Downtilt (when the antenna is mounted facing the horizon, the downtilt reading is zero. When it faces the
ground, the reading is positive, otherwise it will display a negative reading.)
The Copy button provides the option to copy Smart Antenna Tool data to Registration side. The copy operation
will overwrite any data in the Registration column. The fields in the Registration column are editable, in case any
corrections need to be made by the installer.
The CPI certificate content field allows the installer to copy in a textual representation of their certificate
(assumption is that this is also obtained from WFE, but could be from another source as this belongs to the
installer). If the CPI Certificate was provided from the Quick Copy, text will be shown.
If the certificate is found to have good integrity, the screen displays “Certificate format is valid” in green. The
Integrity check only indicates that the format is correct, it is not an indication that the certificate is valid.
The “Confirm all fields are accurate [ ]” checkbox is provided to prevent accidental acceptance of incorrect values.
There will be a Register button which is grayed out and shows color when:
All Install Parameters are complete in the second column.
The installer has checked off that all installation parameters are correct.
The CPI certificate has been input.
The screen displays “Register only at the final install location.” Under the Register button to inform the installer not
to register unless this is the final installation location.
Status fields are provided for:
CBRS Registration Status (Not Registered, Registering, Registered
–
Grant Pending, Registered
–
Grant
Authorized)
Serving cell
If Registration or Grant Authorization Fails, the installer will be shown the failure reason code.
If/When the device is Registered and Grant Authorized, then the “Next” button will show in blue and be clickable.
The Installer is given a button to “Move to new Location”.
