NP727 User’s Manual V1.00
1. Place the NP727 in the best location.
The best location for the NP727 is usually at the center of your wireless network.
2. Connect the NP727 to your network device.
Connect one end of an Ethernet cable to the LAN port of THE NP727 and the other end of the cable to a
switch, a router or a hub. The NP727 is then connected to your existing wired LAN network.
3. There are two ways to supply power over to THE NP727.
(1) Connect the power adapter to the NP727 power socket.
(2) THE NP727 PoE (LAN) port is capable of transmitting DC currents via its PoE (LAN) port. Connect an
IEEE 802.3af-compliant PSE device, e.g. a PoE switch, to the PoE (LAN) port of THE NP727 with the
Ethernet cable.
Now, the hardware installation is completed.
Summary of Contents for INFRASTRUCTURE SERIES
Page 1: ...NetComm INFRASTRUCTURE Series In wall Wireless Access Point USER GUIDE...
Page 3: ...NP727 User s Manual V1 00 4 5 3 Repeater Information 62 4 5 4 Event Log 61 4 6 Online Help 62...
Page 13: ...NP727 User s Manual V1 00 Step 4 Cover it with faceplate...
Page 51: ...NP727 User s Manual V1 00 Layer 2 Firewall Overview Check State...