background image

NP727 User’s Manual V1.00 

 

 

4.3.4 System Upgrade 

THE NP727 provides Web firmware upload/upgrade feature. The administrator can download the latest firmware 

from the website and save it on the administrator PC. To upgrade the system firmware, click 

Browse

 to choose the 

new firmware file you downloaded onto the temporary directory of your PC and then click 

Upload

 to execute the 

process. There will be a prompt confirmation message appearing to notify the administrator to restart the system 

after a successful firmware upgrade. Please restart the system after upgrading the firmware. 

 

 

 

Note:

 

 

It is recommended to check the firmware version number before proceeding further. Please 

make sure you have the correct firmware file.

 

 

Firmware upgrade may sometimes result in loss of some data. Please ensure that all necessary 

settings are written down before upgrading the firmware. 

 

During firmware upgrade, please do not turn off the power. This may permanent damage this 

system. 

 

 

 

For further information of available firmware version, please contact your local dealers.

 

 

 

 

Summary of Contents for INFRASTRUCTURE SERIES



































































Reviews: