NB6, NB6W, NB6Plus4W
User Guide
YML854Rev1
6
www.netcomm.com.au
Setting up TCP/IP
In order to access the Internet through the ADSL Router, each host on your network must install/setup TCP/IP first. Please follow the
steps below to set your network adapter.
If the TCP/IP protocol has not been installed yet, please follow the steps below for installation. In the following
illustrations, we will set the PC to
get an IP address automatically at the same time
.
for Windows 98
1.
Open the Start menu, point to Settings and click on Control Panel.
2.
Double-click the Network icon.
3.
The Network window appears. On the Configuration tab, check out the list of installed network components.
Option
1: If there is no TCP/IP protocol, click Add.
Option
2: If you have TCP/IP protocol, skip to Step 6.
4.
Highlight Protocol and click Add.
5.
Highlight Microsoft on the left side of the window, and select TCP/IP on the right side. Then click OK.
6.
When returning to the Network window, highlight TCP/IP protocol for your NIC and click Properties.
7.
On the IP Address tab: Enable Obtain an IP address automatically and click OK.
8.
When returning to the Network window, click OK
9.
Wait for Windows when copying files.
10.
When prompted with System Settings Change dialog box, click Yes to restart your computer.
for Windows Me
1.
Open the Start menu, point to Settings and click on Control Panel.
2.
Double-click the Network icon.
3.
The Network window appears. On the Configuration tab, check out the list of installed network components.
Option
1: If there is no TCP/IP protocol, click Add.
Option
2: If you have TCP/IP protocol, skip to Step 6.
4.
Highlight Protocol and click Add.
5.
Highlight Microsoft on the left side of the windows, and select TCP/IP on the right side. Then click OK.
6.
While returning to Network window, highlight TCP/IP protocol for your NIC and click Properties.
7.
On IP Address tab: Enable Obtain an IP address automatically and click OK.
8.
While returning to the Network window, click OK.
9.
Wait for Windows when copying files.
10.
When prompted with the System Settings Change dialog box, click Yes to restart your computer.
