YML854 Rev1
NB6, NB6W, NB6Plus4W
NB6, NB6W, NB6Plus4W
User Guide
www.netcomm.com.au
5
PPP over ATM (PPPoA) IP extension Mode
Description:
In this deployment environment, the PPPoA session is between the ADSL WAN interface and BRAS. The
ADSL Router acts as a bridge and receives a public IP address from BRAS for your computer. And only the
one that bears the public IP address is allowed to access the Internet. Moreover, no NAT translation will be
done at this case.
Configuration:
1.
Start your browser and type
192.168.1.1
in the URL box to access ADSL web-based manager.
2.
Go to
Advanced
–
Internet
–
Connections
. And click
Add
.
3.
Key in the
VCI
and
VPI
value, e.g.:
•
VPI
– 8
•
VCI
– 35
Click the
Next
button.
4.
On the
Configure Internet Connection
–
Connection Type
page, select
PPP over ATM (PPPoA)
then click
the
Next
button.
5.
On the
WAN IP Settings
page, select
Obtain an IP address automatically
, check
PPP IP extension
(and
Enable NAT
would become disabled automatically) then click
Next
.
6.
On the
PPP Username and Password
page, enter the PPP username and password offered by your ISP.
Select
Always on
, and then click
Next
.
7.
Check the network information on
This Internet Connection
--
Summary
page. Make sure the settings
match the settings provided by the ISP. Click
Apply
.
8.
Press
Finish
.
