YML8WVPN
NB8WVPN User Guide
8WVPN
NB8WVPN User Guide
NB8WVPN User Guide
NB8WVPN User Guide
www.netcomm.com.au
1
ADSL2+ VPN Router
5.1 Connecting the Cables
Note: If you wish to link to the NB8WVPN wirelessly at the outset, see 3. Establishing a Wireless Connection below.
The
NB8WVPN
can be connected via an Ethernet cable.
To connect to your ADSL Router, you need to have either an Ethernet Port present on your Computer/Notebook.
Connecting your NB8WVPN ADSL Modem via ETHERNET
*Image may differ from product
NB8WVPN
1.
Connect your
NB8WVPN
to either a computer directly or a network hub or switch using CAT5 ethernet cables.
2.
Connect the power pack to the ADSL Router and switch on the power button.
3.
Ensure that there is a LAN link light on the
NB8WVPN
.
4.
Ensure that the computer you intend to use has an IP address in the same subnet as the
NB8WVPN
ADSL Router. (e.g. the
NB8WVPN
’s default IP is 192.168.1.1 - your computer should be on
192.168.1.100 or similar.) If you have DHCP enabled on your computer, the
NB8WVPN
will assign your
computer a suitable IP address.
5.
Ensure that your computer has a LAN link light.
6.
Connect one end of the ADSL phone line to the
NB8WVPN
ADSL Router and the other end to the
wall socket.
