NB8WVPN User Guide
YML8WVPN
www.netcomm.com.au
Key Exchange Method
It has two modes. One is auto and the other is manual.
Authentication Method
It has either pre-shared key or x.509.
Pre-Shared Key
Input Pre-shared key
Perfect Forward Secrecy
Enable/disable the method that is Perfect Forward Secrecy.
Advanced IKE Settings
On IPSec Auto mode, you need to choose the setting of two phases. Click the button then
choose which modes, Encryption Algorithm, Integrity Algorithm, Select Diffie-Hellman Group for
Key Exchange, key time on different phases.
IPSec Connection Name
User-defined label
Remote IPSec Gateway Address
(IP or Domain Name)
The IP address of remote tunnel Gateway, and you can use numeric address and domain name
Tunnel access from local IP addresses
It chooses methods that specify the acceptable host IP on the local side. It has single and
subnet.
IP Address for VPN
If you choose “single”, it displays the numeric address. If you choose “subnet”, it displays two
fields of numeric address and subnet mask.
Tunnel access from remote IP addresses
It chooses methods that specify the acceptable host IP on the remote side. It has single and
subnet.
IP Address for VPN
If you choose “single”, it displays the numeric address. If you choose “subnet”, it displays two
fields of numeric address and subnet mask.
Key Exchange Method
It has two modes. One is auto and the other is manual.
Authentication Method
It has pre-shared key and x.509.
Pre-Shared Key
Input Pre-shared key
Perfect Forward Secrecy
Enable/disable the method that is Perfect Forward Secrecy.
Advanced IKE Settings
On IPSec Auto mode, you need to choose the setting of two phases. You click the button then
choose which modes, Encryption Algorithm, Integrity Algorithm, Select Diffie-Hellman Group for
Key Exchange, key time on different phases.
