PRODUCT DATASHEET
NetComm
Wireless
Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.
NETCOMM WIRELESS LIMITED
Head Office
- 18-20 Orion Road, Lane Cove,
NSW 2066,
Sydney, Australia ABN 85 002 490 486
E:
sales@netcommwireless.com
NetComm
Wireless
www.netcommwireless.com
NetComm
Wireless
SPECIFICATIONS
PACKAGE INCLUDES
• 1 x NF2
•
Power Adapter
• Printed Quick Start Guide
• Ethernet Cable (RJ-45)
• Wireless Security Card
• Warranty Card
• Dual Band WiFi antenna
ENVIRONMENTAL AND PHYSICAL
• Operating temperature: 0-40
o
C, Humidity: 10%-90%
non-condensing
• Storage temperature: -10-70
o
C, Humidity: 0%-95%
non-condensing
•
Dimensions:
130mm (L) x 33mm(W) x 190mm(H)
• DC Input Voltage 12V/2
A
DEVICE INTERFACE
•
1
x 10/100/1000Mbps WAN port
• 3
x 10/100/1000Mbps LAN port
s
• 2
x USB 2.0 port
s
– for 3G/4G USB Modem
and
USB storage devices
• 1 x
power
button
• 1 x WPS button
• 1 x
r
eset button
• 2x3 internal WiFi antennas (1 x external antenna)
• LED - 3G/4G signal / Internet connection / Link / WAN /
LAN 1-3 / WiFi /
Power
• Power Jack
WIRELESS WAN
• 1 x USB 2.0 port for external 3G/4G
modem
• GPRS/EDGE/WCDMA/HSDPA/HSUPA/ CDMA2000/
EVDO/LTE
ETHNERNET WAN
• 1 x WAN
port (10/100/1000 Mbps)
• PPPoE, DHCP client, Static IP, PPTP, L2TP
• Auto-reconnect, dial-on demand, manual connect
WIRELESS
• IEEE 802.11n. Backwards compatible with IEEE
802.11b/g/a
• 2.4GHz & 5GHz Concurrent WiFi
• SSID broadcast or in stealth mode
• Auto/Manual Channel selection
• WEP/WPA/WPA-PSK/WPA2/WPA2-PSK
•
WPS
button (WiFi Protected Setup)
NAS
• File sharing
• DLNA
SECURITY
• IP/Service Filter
• URL blocking
• MAC control
• DoS (Denial of Service) Protected
ROUTING
•
Static Route
• Dynamic Route (RIP v1/v2)
• DMZ
ADMINISTRATION
•
UPnP
• IGD
• Syslog
• Web-based UI
•
QoS
• Remote Login
• Backup/Restore
Settings
• SNMP
• TR-069 auto provisioning
• VPN IPSec, L2TP client/server, PPTP client/server
COMPLIANCE
• C-Tick
Dual Band WiFi Gigabit Hub
Using the latest wireless technology, the NetComm NF2 gives you
maximum range and maximum speed.
The NF2 features concurrent dual band WiFi giving you two powerful WiFi networks with a
combined speed of up to 900Mbps. With two networks running on two unique frequencies you
can prioritise different devices between the two networks. Enjoy maximum speed and range for
streaming video, music and transferring other bandwidth intensive files around your home or office.
Choose how you connect:
ADSL
: Give your ADSL modem a boost and connect the NF2 to create your own powerful and
secure WiFi network
Fibre
: Future proof your Internet. The NF2 is designed for NBN’s Fibre broadband. When you
get NBN’s Fibre service to your premises, switch the NF2 straight to your Fibre service.
3G/4G
: The NF2 works with your 3G or 4G USB modem, which means you can create your
own WiFi hotspot wherever you have mobile coverage.
Wired devices are also supported with three high-speed Ethernet ports that can be used to
connect NAS boxes, media servers or any Ethernet device; you can also connect a USB Hard
drive and turn it into a network storage drive, accessible from all devices on your network.
1
Maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 802.11n Draft 2.0
specifications. Actual wireless speed and coverage are dependent on network and environmental conditions included but
not limited to volume of network traffic, building materials and construction/layout.
3 x Gigabit Wired Connections
(Computers, game consoles, media centres etc)
USB File Share
(Music, movies, photos and documents)
3G/4G USB Modem
ADSL/Cable
(ADSL/Cable modem required)
Fibre
FIBRE
3 WAYS TO CONNECT
or
or
Concurrent Dual Band Local WiFi
(Laptops, tablets, portable gaming etc)
