16
NTC-8000 – M2M Multi-Port Network Gateway
UM-00006 v1.1
www.netcommwireless.com
ITEM
DEFINITION
Phone Module
The phone module name, hardware and firmware version
Module Boot version
The installed boot loader version of the phone module.
Module PRID
The Protocol ID of the phone module.
System Up Time
The time in hours, minutes and seconds that the gateway has been up.
Provider
The current connection’s mobile broadband provider.
Country Code
Each country has a unique code that helps to identify the mobile broadband
network.
Network code
Each mobile broadband provider has a unique network code that identifies their
network.
Coverage
The coverage type of mobile broadband service the current connection is using.
Connection Status
The current status of the gateway’s connection.
IMEI
The International Mobile Equipment Identity number unique to each cellular network
device.
Frequency
The frequency of the current connection.
Signal Strength
The signal strength of the mobile broadband connection measured in decibels.
Signal Quality (Ec/Io)
A measurement of the portion of the received signal that is usable. This is basically
the signal strength minus the signal noise level.
Received Signal Code Power
(RSCP)
The power level of the signal on the current connection’s channel.
HSUPA Category
Displays the HSUPA category (1-9) for the current uplink.
HSDPA Category
Displays the HSDPA category (1-8) for the current downlink.
SIM ICCID
The Integrated Circuit Card Identifier of the SIM card used with the gateway, a
unique number up to 19 digits in length.
Primary Scrambling Code (PSC)
The Primary Scrambling Code for the current signal.
Location Area Code (LAC)
The ID of the cell tower grouping the current signal is broadcasting from.
Routing Area Code (RAC)
The Routing Area Code is a subset of the Location Code and helps to identify the
group of or individual cell towers the current connection’s is broadcasting from.
IMSI
The International Mobile Subscriber Identity is a unique identification for the current
mobile broadband connection.
Cell ID
A unique code that identifies the base station from within the Location Area where
the current 3G signal.
Channel Number (UARFCN)
The channel number of the current 3G connection.
Table 15 - Advanced Status Settings