24
NTC-8000 – M2M Multi-Port Network Gateway
UM-00006 v1.1
www.netcommwireless.com
DHCP
The DHCP page is used to adjust the DHCP settings used by the gateway. The DHCP settings are then passed onto any device
connecting via DHCP.
You can manually set the DHCP Start and End range, the DHCP Lease time, the default Domain name suffix, Primary and
Secondary DNS Server, the Primary and Secondary WINS Server, as well as the NTP, TFTP and Option 150/Option 160 (VoIP
options) settings.
Note: The DHCP Lease Time must not be less than 120 seconds.
Figure 20 - DHCP Settings
After entering the applicable details, click the Save button.
You can also assign a particular IP address to a specific device every time that device makes a DHCP request as follows:
Figure 21 - DHCP Settings - Fixed Mapping
1.
Click the Add button.
2.
In the Computer Name field, enter a name for the computer or device.
3.
In the MAC Address field, enter the MAC Address of the computer or device.
4.
In the IP Address fields, enter the IP address you wish to assign to the device.
5.
Select the Enable checkbox to enable the rule.
6.
Click the Save button to save the new settings.
