User’s Manual
Wireless Serial Server GW5120
Copyright © 2009 Neteon Technologies, Inc.
All rights reserved.
18
5.3.4. SNMP Settings
Operation: [Network]
Æ
[SNMP Settings]
Check “
Enabling Settings
” to enable SNMP function. Enter desired
SysName
、
SysLocation
、
SysContact
information on SNMP Settings fields. The changes of SNMP Settings will take effect
only after the GW5120 restarted.
Fig 21. SNMP Setting from Network web page
5.4. Wireless Configuration
There are three fields of information on Wireless Configuration page which are Default, Current and
Site-Survey Information. Click on “
Wireless
” link and the following screen shall appear.
Fig 22. Wireless information by Web page
There are 3 buttons can be operated on Wireless page
Rescan:
Click “
Rescan
” button and GW5120 will start site-survey procedures, then on the
site-survey list will display the access points founded.
Select:
Select the desired wireless connection/access point from site-survey list. Enter the
wireless parameters on the pop up window. See section 5.4.1 for detail.
User
defined:
Wireless connection can be manually defined by entering wireless parameters
on the pop up window. See section 5.4.1 for detail.
