User’s Manual
Wireless Serial Server GW5120
Copyright © 2009 Neteon Technologies, Inc.
All rights reserved.
29
6. Telnet
Configuration
User can also use Telnet utility to change GW5120 configuration settings.
Open MS-DOS command prompt window or other telnet tools
Enter the “
IP address
” of the GW5120 (For example,
Telnet 10.0.50.100
). The system then
prompts for username and password, the default username is “
admin
” and the default
password is
null (blank)
. Main menu will display after that.
If the GW5120 does not receive any command within
1 minute
, Telnet will be terminated
automatically.
The changes of networking parameters will take effect only after the GW5120 is restarted.
Fig 38. Login into System by Telnet
Fig 39. Overview information by telnet
6.1. General Information
Operation: [Main]
Æ
[1 Overview]
