MAN-REF-CASW Web
Browser
Interface
Page
13
Channel Clear Stats
This command clears all or selected channel statistics. Prior to selecting this button, provide the follow-
ing data on the selection screen:
IFname -
specify the name of the channel interface to clear.
Device# -
limit the clear of the channel interface to a particular device. For an ESCON
channel interface running in “configured” mode, this parameter is the Device
Index. For an ESCON channel interface running in “non-configured” mode, or
for a Bus & Tag channel interface, this parameter is an offset from the UADD
specification. If the UADD parameter is not used, this parameter is an offset
from the low-order byte of the startGNA address.
Channel Start Interface
This command starts a defined channel interface. Prior to selecting this button, provide the following
data on the selection screen:
IFname
the name of the channel interface to start.
Channel Stop Interface
This command stops a defined channel interface. Prior to selecting this button, provide the following
data on the selection screen:
IFname
the name of the channel interface to stop.
Channel Undefine Interface
This command removes a defined channel interface.
Prior to selecting this button, provide the following data on the selection screen:
IFname
the name of the channel interface to stop.
