Multi Service Border Gateway User Manual for NexusWay 800 Series
7. WAN 4 External Port
:
Connect a fourth broadband modem here, if available.
8. Indicators
:
The indicators on the front panel show the Power status for the system, and a 10/100 link
indicator for: LAN1, LAN2, WAN1, WAN2, WAN3 and WAN4. The Power indicator will show an
orange light when the power is on. For the 10/100 indicators, when the transmission rate
reaches 10 MB, the indicator will be lightless. When 100 MB is reached, you will see a green
light. Every ports indicator has two LED lights, which are "LINK" and "ACT". The green LINK
light will light up to indicate a successful connection when the cable endpoint is properly
plugged in. The ACT light, will flash when data is transmitted through the port.
B. Rear Panel
1. Power Input
:
Plug in the supplied power cable.
2. Power Switch
:
To turn on NexusWay 800, switch to “l”; to turn off NexusWay 800, switch to “o”.
Pages: 8/119