Security Gateway Manual
Netgate-4100
Connecting to the Console
There are times when accessing the console is required. Perhaps GUI console access has been locked out, or the
password has been lost or forgotten.
See also:
Connecting to the Console Port
Connect to the console. Cable is required.
Tip:
To learn more about getting the most out of your Netgate appliance, sign up for a
course
or browse our extensive
1.4 Input and Output Ports
1.4.1 Networking Ports
The WAN1 and WAN2 Combo-Ports are shared ports. Each has an RJ-45 port and an SFP port. Only the RJ-45
or
the
SFP connector can be used each port.
Note:
Each port, WAN1 and WAN2, is descrete and individual. You can use the RJ-45 connector on one port, and
the SFP connector on the other.
Port
Interface Name
Port Name
Port Type
Port Speed
2
WAN1
ix3
RJ-45/SFP
1 Gbps
3
WAN2
ix2
RJ-45/SFP
1 Gbps
4
LAN1 - LAN4
igc0 - 3
RJ-45
2.5 Gbps
© Copyright 2022 Rubicon Communications LLC
11
