GS700TP Hardware Installation Guide
Introduction
1-16
v1.0, November 2007
•
SFP types supported are:
–
1000Base-SX
–
1000Base-LX
–
100Base - FX
•
The devices support full Netgear Smart Switch functionality and provide full compatibility
with the following IEEE standards:
–
IEEE 802.3i, (10Base-T)
–
IEEE 802.3u (100Base-TX, 100Base-FX)
–
IEEE 802.3x (Full-duplex flow control)
–
IEEE 802.3ab (1000Base-T)
–
IEEE 802.3z (1000Base-X)
–
IEEE 802.3af (DTE Power via MDI)
•
Auto-sensing and auto-negotiating capabilities for all ports.
•
Auto Uplink™ on all ports to make the right connection.
•
Automatic address-learning function to build the packet-forwarding information table. The
table contains up to 4K Media Access Control (MAC) addresses.
•
Full- and half-duplex functions for all 10/100/1000 Mbps ports.
•
Store-and-Forward transmission to remove bad packets from the network.
•
Full-duplex IEEE 802.3x pause frame flow control.
•
Active flow control to minimize packet loss/frame drops.
•
Half-duplex back-pressure control.
•
Per port LEDs, System LEDs.
•
Internal power supply.
•
Standard 1U high, rack mountable19” chassis.
•
Fan speed control supported (optional).
•
GS724TP
supports the following POE functions:
–
Smart Power Managed function handles the power of each port in the event of limited
available power.
