Advanced Settings
85
AirCard 790S Mobile Hotspot
Enable VPN Pass-Through
To connect to a corporate network using VPN, you must first enable VPN connections
(pass-through).
To enable VPN pass-through:
1.
From a computer or wireless device that is connected to your network, launch an
Internet browser.
2.
Enter
http://netgear.aircard
or
http://192.168.1.1
.
Your device might have a different web page address. To get the web page address for
your device, tap
Settings > More > Device Information > AC790 Manager
or look at the
label underneath the device battery.
A login screen displays.
3.
Enter the administrator login password.
The default password is
admin
. The password is case-sensitive.
The Home screen displays.
4.
Select
Settings > Router > Basic
.
The Basic page displays.
5.
In the LAN section, select the
On
radio button next to VPN Passthrough.
The
Submit
button displays after you make a selection.
6.
Click the
Submit
button.
Your settings are saved.
Configure APN Details
Your mobile hotspot comes preconfigured with the access point name (APN) for your
network service provider.
The hotspot checks the APN to determine the type of network connection to establish.
To add an APN for another network:
1.
From a computer or wireless device that is connected to your network, launch an
Internet browser.
2.
Enter
http://netgear.aircard
or
http://192.168.1.1
.
Your device might have a different web page address. To get the web page address for
your device, tap
Settings > More > Device Information > AC790 Manager
or look at the
label underneath the device battery.
A login screen displays.
