background image

Specify Network Settings 

49

 AC1750 WiFi Cable Modem Router

Disable SIP ALG

. Some VoIP applications do not work well with the SIP ALG. 

Selecting this check box to turn off the SIP ALG might help your VoIP devices to 
create or accept a call through the modem router.

6. 

Click the 

Apply

 button.

Your settings are saved.

Change the MTU Size

The maximum transmission unit (MTU) is the largest data packet a network device transmits. 
When one network device communicates across the Internet with another, the data packets 
travel through many devices along the way. If a device in the data path uses a lower MTU 
setting than the other devices, the data packets must be split or “fragmented” to 
accommodate the device with the smallest MTU. 

The best MTU setting for NETGEAR equipment is often the default value. In some situations, 
changing the value fixes one problem but causes another. Leave the MTU unchanged unless 
one of these situations occurs:

You experience problems connecting to the Internet, and the technical support of either 
the Internet provider or NETGEAR recommends changing the MTU setting. These 
web-based applications might require an MTU change:

-

A secure website that does not open or displays only part of a web page

-

Yahoo email

-

MSN portal

-

America Online’s DSL service

You use VPN and experience severe performance problems.

You used a program to optimize MTU for performance reasons and now you are 
experiencing connectivity or performance problems.

Note:

An incorrect MTU setting can cause Internet communication 

problems. For example, you might not be able to access certain 
websites, frames within websites, secure login pages, or FTP or POP 
servers.

To change the MTU size:

1. 

Launch a web browser from a computer or wireless device that is connected to the 

network.

2. 

Type 

http://routerlogin.net

.

A login window opens.

3. 

Enter the modem router user name and password.

Summary of Contents for C6300







































































































Reviews: