Advanced Settings
37
NETGEAR Wireless Cable Gateway
1.
Select
Advanced > Port Triggering
.
2.
For each port trigger, enter the settings in the Port Trigger List:
•
Trigger Range
. To specify the range of outgoing ports that will be monitored to trigger
the incoming port forwarding rule, enter the
Start Port
and
End Port
.
•
Target Range
. To specify the range of incoming ports that will be opened when
triggered, enter the
Start Port
and
End Port
.
•
Protocol
. Select the protocol for the ports:
3.
Select the
Enable
checkbox for the port trigger.
4.
Perform one of the following actions:
•
Click
Apply
to save your settings and activate the port triggers.
•
To remove a port trigger, select it’s radio button and click
Delete
.
•
To return all trigger and target ranges to zero, click
Reset
.
