Technical Specifications
50
NETGEAR Wireless Cable Gateway
Factory Default Settings
You can return the gateway to its factory settings. On the bottom of the gateway, press and
hold the Restore Factory Settings button
for over 7 seconds. The gateway resets, and
returns to its factory settings.
Your device will return to the factory configuration settings
shown in the following table.
Factory Default Settings
Gateway Login
User login URL
http://192.168.1.1
User name and password (case
sensitive)
admin/password
Local Network
(LAN)
LAN IP
192.168.1.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP starting IP address
192.168.1.2
DHCP Ending IP address
192.168.1.254
Firewall
Inbound communication from the
Internet
Disabled (except traffic on port 80, the http port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering
Disabled
Internet
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
