Wireless Cable Voice Gateway Model CVG824G Reference Manual
1-4
Installing the Gateway
v1.0, November 2006
Installing the Voice Gateway
Installation is a four-part process. Complete the installation in this order:
1. Check the Installation Requirements. See
“Installation Requirements” on page 1-4
.
2. Connect the Gateway. See
“Connecting the Wireless Voice Gateway” on page 1-5
.
3. Log in to the Gateway. See
“Logging In To the Wireless Voice Gateway” on page 1-7
.
4. Connect to the Internet. See
“Connecting to the Internet and VoIP” on page 1-8
.
After installation, set up the wireless connection as explained in
Chapter 2, “Wireless
Configuration”
.
Installation Requirements
Check the requirements listed below before installing the gateway:
•
Local Computer
. During installation, you need a local computer to connect to the gateway via
Ethernet or USB.
–
This computer should be set up to access the cable modem Internet service.
Figure 1-2
Reset button
Wireless antenna
AC power adapter input
Four Ethernet LAN ports to connect local
computers
Coaxial cable to your cable
USB port
service provider
Voice/phone ports to
connect handsets
