Wireless ADSL2+ Modem Router DG834Gv5 User Manual
Protecting Your Network
3-9
v1.0, March 2010
2.
Either select a service from the
Inbound Services
drop-down list, or select
User Defined
and
create a custom service.
3.
When you are finished, click
Apply
.
The Outbound Services screen includes the following fields:
•
Service
. Select the application or service from the drop-down list to be allowed or blocked.
You can use the Add Custom Service feature to add any additional services or applications that
are not in the list; see
“Services”
for details.
•
Action
. Choose when you want this type of traffic to be handled. You can block or allow
always, or you can block or allow according to the schedule defined in the Schedule screen.
•
LAN users
. This setting determine which packets are covered by the rule, based on their
source LAN IP address. Select the desired option:
–
Any
. All IP addresses are covered by this rule.
–
Address range
. If this option is selected, you must fill in the
Start
and
Finish
fields.
–
Single address
. Enter the required address in the Start field.
•
WAN users
. This setting determines which packets are covered by the rule, based on their
destination WAN IP address. Select the option that you want:
–
Any
. All IP addresses are covered by this rule.
–
Address range
. If this option is selected, you must fill in the
Start
and
Finish
fields.
–
Single address
. Enter the required address in the
Start
field.
Figure 3-6
