Internet Configuration
12
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
3.
Click
Apply
to apply and save your changes, or
Cancel
to discard your changes.
Setting
Description
Internet Connection Mode
Select one of the following:
• Use ADSL first and if fail use Mobile Broadband connection
• Always use Mobile Broadband connection
• Always use ADSL connection
Failover Detection Method
1
1. This field is available only when the Internet Connection Mode is Use Ethernet first and if fail use 3G
mobile connection.
Select the failover method and enter the following information:
• DNS lookup using WAN DNS Server
• Perform a DNS lookup by a hostname
If you select this option, you must also enter the DNS lookup
hostname in the text field to the far right of this option.
• Ping this IP address
If you select this option, you must also enter the IP address in the
text field to the far right of this option.
Retry Interval is
1
Enter the retry interval in seconds.
Failover after
1
Enter the number of retry attempts to perform before failing over.
Resume after
1
Enter how long to wait for primary link to be stabilized before
resuming use of the primary link.
Enable Hardware link detection
(Checkbox and text field)
To enable, select the checkbox and enter the amount of time in
seconds to wait before failing over if the Ethernet link is dropped. This
is independent of the DNS/Ping detection methods.
3G Mobile Broadband Settings
To configure your 3G mobile broadband Internet settings manually:
1.
Select
3G Mobile Broadband Settings
.
This opens the 3G Mobile Broadband Settings configuration screen. This screen allows
you to configure the broadband account access for your NETGEAR Modem.
Figure 4. 3G Mobile Broadband Settings Configuration Screen
Table 1. Broadband Settings
