Universal Remote User Manual
2-8
Programming the NETGEAR Universal Remote
v1.0, October 2008
3.
Enter
9 9 0
. The LED blinks twice.
4.
To view the code for the first digit, press
1
. Count the LED blinks (for example, three blinks =
3), and write down the number in the appropriate code listing in step 1 under
“Programming a
Device ” on page 2-6
.
5.
Repeat step 4 for the four remaining digits, using
2
for the second digit,
3
for the third digit,
4
for the fourth digit, and
5
for the fifth digit.
6.
To check for other device codes, repeat these instructions, substituting the device button for
TV
.
Note:
If a code digit is
0
, the LED does not blink.
