Chapter 5: Managing Device Security
|
151
FS728TP Smart Switch Software Administration Manual
5.
In the
Connection Timeout
field, specify the amount of time that passes before the
connection between the device and the server times out. The field range is from
1 to 30 seconds.
6.
If you make changes to the page, or add a new entry, click
Apply
to apply the changes to
the system.
7.
To delete a configured server, select the IP address of the server from the
Server
drop down menu, and then click
Delete
.
Authentication List Configuration
Use the Authentication List page to configure the default login list. A login list specifies one or
more authentication methods to validate switch or port access for the
admin
user.
Note:
Admin
is the only user on the system and is assigned to a
preconfigured list named defaultList, which you cannot delete.
To access the Authentication List page, click
Security
Management Security
, and then
click the
Authentication List
link.
To change the authentication method for the defaultList:
1.
Select the check box next to the defaultList name
2.
Use the drop down menu in the
1
column to select the authentication method that should
appear first in the selected authentication login list. If you select a method that does not time
out as the first method, such as ‘local’, no other method will be tried, even if you have
specified more than one method. This parameter will not appear when you first create a new
login list. User authentication occurs in the order the methods are selected. Possible
methods are as follows:
Summary of Contents for FS728TP - ProSafe 24 Port 10/100 Smart Switch
Page 8: ...FS728TP Smart Switch Software Administration Manual 8 Table of Contents ...
Page 188: ...188 Chapter 5 Managing Device Security FS728TP Smart Switch Software Administration Manual ...
Page 231: ...Chapter 8 Help 231 FS728TP Smart Switch Software Administration Manual ...
Page 261: ...Index 261 FS728TP Smart Switch Software Administration Manual ...
