Version 1.0
FVX538 VPN Config (Policy name:
LAN2Client
)
Access the VPN Wizard via the VPN
configuration page.
In the VPN Policy section click on Add
(this will create a new manual VPN policy
which will use an existing IKE policy)
Create a new VPN client policy named
LAN2toClient
Specify the Remote Endpoint IP address
to be the Public address of the FVS338
Specify the Local IP subnet to be the one
of the VPN clients as
192.168.0.0/24
and
the Remote IP subnet to be the LAN of
the FVS338 as
172.22.102.0/24
Ensure that the Select IKE Policy is set to
BoxtoBox
Click on Apply
FVS338 VPN Config (Policy name:
LAN2Client
)
Access the VPN Wizard via the VPN
configuration page.
In the VPN Policy section click on Add
(this will create a new manual VPN policy
which will use an existing IKE policy)
Create a new VPN client policy named
LAN2toClient
Specify the Remote Endpoint IP address
to be the Public address of the FVX538
Specify the Local IP subnet to be the one
of the FVS338
172.22.102.0/24
and the
Remote IP subnet to be the VPN clients
one 192.168.0.0/24
Ensure that the Select IKE Policy is set to
BoxtoBox
Click on Apply
