Firewall Protection
164
NETGEAR ProSAFE VPN Firewall FVS318G v2
-
Access to the web server is the (simulated) public IP address
. 10.1.0.52
Tip:
If you arrange with your ISP to use more than one public IP address,
you can use the additional public IP addresses to map to servers on
your LAN or DMZ. One of these public IP addresses is used as the
primary IP address of the router that provides Internet access to your
LAN computers through NAT. The other addresses are available to
map to your servers.
To configure the VPN firewall for additional IP addresses:
1.
Log in to the unit:
a.
In the address field of any of the qualified web browsers, enter
https://192.168.1.1
.
The NETGEAR Configuration Manager Login screen displays.
b.
In the
Username
field, enter
admin
and in the
Password / Passcode
field, enter
password
.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c.
Click the
Login
button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2.
Select
Security > Firewall
.
The Firewall submenu tabs display.
3.
Choose one of the following:
•
If your server is to be on your LAN, click the
LAN WAN Rules
submenu tab.
•
If your server is to be on your DMZ, click the
DMZ WAN Rules
submenu tab.
The
IPv4
radio button is selected by default. The screen displays the IPv4 settings.
