Virtual Private Networking Using IPSec and L2TP Connections
227
NETGEAR ProSAFE VPN Firewall FVS318G v2
8.
Configure the global parameters:
a.
In the left column
of the Configuration Panel screen, c
lick
Global Parameters
.
b.
Specify the default lifetimes in seconds:
•
Authentication (IKE)
,
Default
. The default lifetime value is 3600 seconds.
Change this setting to
28800
seconds to match the configuration of the VPN
firewall.
Local and Remote ID
Local ID
As the type of ID, select
DNS
from the list because you specified FQDN in
the VPN firewall configuration.
As the value of the ID, enter
remote.com
as the local ID for the VPN client.
Note:
The remote ID on the VPN firewall is the local ID on the VPN client. It
might be less confusing to configure an FQDN such as client.com as the
remote ID on the VPN firewall and then enter
client.com
as the local ID on
the VPN client.
Remote ID
As the type of ID, select
DNS
from the list because you specified an FQDN in
the VPN firewall configuration.
As the value of the ID, enter
local.com
as the remote ID for the VPN firewall.
Note:
The local ID on the VPN firewall is the remote ID on the VPN client. It
might be less confusing to configure an FQDN such as router.com as the local
ID on the VPN firewall and then enter
router.com
as the remote ID on the
VPN client.
Table 45. VPN client advanced authentication settings (continued)
Setting
Description
