manualshive.com logo in svg

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router, Reference Manual

The NETGEAR FVS318G ProSafe Gigabit VPN Firewall Data Sheet Router offers powerful network protection and seamless connectivity. Unlock its full potential by accessing the comprehensive Reference Manual, available for free download at 88.208.23.73:8080. This manual provides detailed instructions and valuable insights to optimize your experience with this high-performance router.

Share
Download
background image

3

Contents

Chapter 1  Introduction

What Is the NETGEAR ProSAFE VPN Firewall FVS318G v2? . . . . . . . . . . . . . . . . .9
Key Features and Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Advanced VPN Support for IPSec  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
A Powerful, True Firewall  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Security Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Autosensing Ethernet Connections with Auto Uplink . . . . . . . . . . . . . . . . . . .  10
Extensive Protocol Support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
Easy Installation and Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
Maintenance and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
Rear Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Bottom Panel with Product Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17

Choose a Location for the VPN Firewall  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
Wall-Mount the VPN Firewall with the Mounting Kit  . . . . . . . . . . . . . . . . . . . . .  18
Log In to the VPN Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
Web Management Interface Menu Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
Requirements for Entering IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22

IPv4 Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
IPv6 Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23

Chapter 2  IPv4 and IPv6 Internet and Broadband Settings

Internet and WAN Configuration Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25

IPv4 Internet Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25
IPv6 Internet Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25

Configure the IPv4 Internet Connection and WAN Settings  . . . . . . . . . . . . . . .  26

Configure the IPv4 WAN Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26
Let the VPN Firewall Automatically Detect and

Configure an IPv4 Internet Connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Manually Configure an IPv4 Internet Connection . . . . . . . . . . . . . . . . . . . . . .  31
Configure Dynamic DNS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35

Configure the IPv6 Internet Connection and WAN Settings  . . . . . . . . . . . . . . .  38

Configure the IPv6 Routing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39
Use a DHCPv6 Server to Configure an IPv6 Internet Connection  . . . . . . . .  40
Configure a Static IPv6 Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . .  42
Configure a PPPoE IPv6 Internet Connection  . . . . . . . . . . . . . . . . . . . . . . . . .  44
Configure 6to4 Automatic Tunneling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47

Summary of Contents for FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router







































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router

Palo Alto PA-800 Series Hardware Reference Manual preview
PA-800 Series
Brand: Palo Alto Pages: 44
Lanner electronics FW-6420 User Manual preview
FW-6420
Brand: Lanner electronics Pages: 48
SonicWALL NSA 240 Installation Manual preview
NSA 240
Brand: SonicWALL Pages: 2
SonicWALL CSa 1000 Installation And Replacement preview
CSa 1000
Brand: SonicWALL Pages: 2
SonicWALL NSA 2600 Upgrade Manual preview
NSA 2600
Brand: SonicWALL Pages: 15
SonicWALL SMA 210 Deployment Manual preview
SMA 210
Brand: SonicWALL Pages: 26
SonicWALL 2100 CF Getting Started Manual preview
2100 CF
Brand: SonicWALL Pages: 21
SonicWALL TZ 170 SP Getting Started Manual preview
TZ 170 SP
Brand: SonicWALL Pages: 42
SonicWALL Email Security 7.0 8000 Getting Started Manual preview
Email Security 7.0 8000
Brand: SonicWALL Pages: 32
SonicWALL TZ 180 Recommends Manual preview
TZ 180
Brand: SonicWALL Pages: 44
SonicWALL Email Security 800 Getting Started Manual preview
Email Security 800
Brand: SonicWALL Pages: 40
SonicWALL ESA 5000 Getting Started Manual preview
ESA 5000
Brand: SonicWALL Pages: 41
SonicWALL 1RK40-0DA Safety And Regulatory Reference Manual preview
1RK40-0DA
Brand: SonicWALL Pages: 65
SonicWALL NSA 2400 Getting Started Manual preview
NSA 2400
Brand: SonicWALL Pages: 70
SonicWALL 1RK33-0BB Getting Started Manual preview
1RK33-0BB
Brand: SonicWALL Pages: 68
SonicWALL GX 250 Installation Manual preview
GX 250
Brand: SonicWALL Pages: 88
SonicWALL CDP 6.0 Administrator'S Manual preview
CDP 6.0
Brand: SonicWALL Pages: 272
ei3 Amphion S14-H Green Box User Manual preview
Amphion S14-H Green Box
Brand: ei3 Pages: 26

Brands by name

Popular brands

Load more brands