Monitor System Access and Performance
352
NETGEAR ProSAFE VPN Firewall FVS318G v2
4.
Click the
Apply
button.
Your changes are saved.
To display a report of the Internet traffic by type:
1.
Log in to the unit:
a.
In the address field of any of the qualified web browsers, enter
https://192.168.1.1
.
The NETGEAR Configuration Manager Login screen displays.
b.
In the
Username
field, enter
admin
and in the
Password / Passcode
field, enter
password
.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c.
Click the
Login
button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2.
Select
Monitoring > Traffic Meter
.
The Broadband Traffic Meter screen displays.
When Limit is reached
Block Traffic
Select which action the VPN firewall performs when the traffic limit is reached:
•
Block All Traffic
. All incoming and outgoing Internet and email traffic is
blocked.
•
Block All Traffic Except E-Mail
. All incoming and outgoing Internet traffic is
blocked, but incoming and outgoing email traffic is still allowed.
Send e-mail alert
An email alert is sent when traffic is blocked. Ensure that emailing of logs is enabled
on the Firewall Logs & E-mail screen (see
Configure Logging, Alerts, and Event
Notifications
on page 353).
Table 78. Broadband Traffic Meter screen settings (continued)
Setting
Description
