Monitor System Access and Performance
356
NETGEAR ProSAFE VPN Firewall FVS318G v2
Enable E-mail Logs
Do you want
logs to be
emailed to
you?
Select the
Yes
radio button to enable the VPN firewall to email logs to a specified email
address. Complete the fields that are shown on the right side of the screen.
Select the
No
radio button to prevent the logs from being emailed, which is the default
setting.
E-Mail Server Address The IP address or Internet name of your ISP’s outgoing email
SMTP server.
Note:
If you leave this field blank, the VPN firewall cannot send
email logs and alerts.
Return E-Mail Address The email address of the sender for email identification purposes.
For example, enter fvs_alerts@company.com.
Send to E-Mail
Address
The email address to which the logs are sent. Typically, this is the
email address of the administrator.
Custom SMTP Port
Enter the port number of the SMTP server for the outgoing email.
Select the SMTP server authentication for outgoing email:
•
No Authentication
. The SMTP server does not require authentication.
•
Login Plain
. The SMTP server requires authentication with regular login. Specify the
user name and password to be used for authentication.
•
CRAM-MD5
. The SMTP server requires authentication with CRAM-MD5 login. Specify
the user name and password to be used for authentication.
Username
The user name for SMTP server authentication.
Password
The password for SMTP server authentication.
Respond to Identd
from SMTP Server
To respond to Ident protocol messages, select the
Respond to
Identd from SMTP Server
check box. The Ident protocol is a
relatively weak scheme to verify the sender of an email. (A
common daemon program for providing the Ident service is
Identd.)
Send e-mail logs by Schedule
Unit
Enter a schedule for sending the logs. From the
Unit
list, select one of the following:
•
Never
. No logs are sent.
•
Hourly
. The logs are sent every hour.
•
Daily
. The logs are sent daily. Specify the time.
•
Weekly
. The logs are sent weekly. Specify the day and time.
Day
From the
Day
list, select the day on which the logs are sent.
Time
From the
Time
list select the hour on which the logs are sent, and select either the
a.m.
or
p.m.
radio button.
Table 79. Firewall Logs & E-mail screen settings (continued)
Setting
Description
