Introduction
2-1
March 2004, 202-10027-01
Chapter 2
Introduction
This chapter describes the features of the NETGEAR ProSafe Wireless 802.11g Firewall/Print
Server Model FWG114P.
Key Features of the FWG114P
The ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P, with a 4-port switch,
connects your LAN to the Internet through a broadband modem. With auto fail-over connectivity
through the serial port, the FWG114P provides highly reliable Internet access.
The FWG114P is a complete security solution that protects your network from attacks and
intrusions and enables secure communications using Virtual Private Networks (VPNs). Unlike
simple Internet sharing routers that rely on Network Address Translation (NAT) for security, the
FWG114P uses Stateful Packet Inspection for Denial of Service attack (DoS) attack protection and
intrusion detection. The FWG114P allows Internet access for up to 253 users. It provides multiple
Web content filtering options, plus browsing activity reporting and instant alerts via e-mail.
Parents or network administrators can establish restricted access policies based on time-of-day,
Web site addresses and address keywords, and share high-speed cable/DSL Internet access for up
to 253 personal computers.
With minimum setup, you can install and use the router within minutes. The FWG114P Wireless
Firewall/Print Server provides the following features:
•
802.11g and 802.11b standards-based wireless networking.
•
Easy, Web-based setup for installation and management.
•
Supports two VPN tunnels, Content Filtering, and Site Blocking Security.
•
Built-in 4-port 10/100 Mbps Switch and USB 2.0 Printer Port.
•
Ethernet and Serial ports for connection to a WAN device, such as a broadband modem.
•
Extensive Protocol Support.
•
Login capability.
•
Front panel LEDs for easy monitoring of status and activity.
•
Flash memory for firmware upgrade.
•
NAT off (classical routing).
