Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
5-16
Spanning Tree Protocol Commands
v1.0, February 2007
Point To Point
MAC Status
Derived value indicating if this port is part of a point to point
link
.
CST Regional
Root
The regional root identifier in use for this port.
CST Port Cost
The configured path cost for this port.
5.2.5 show spanning-tree mst port summary
This command displays the settings of one or all ports within the specified multiple
spanning tree instance. The parameter
<mstid>
indicates a particular MST instance. The
parameter {
<slot/port> | all}
indicates the desired switch port or all ports.
If you specify 0 (defined as the default CIST ID) as the
<mstid>
, the status summary
displays for one or all ports within the common and internal spanning tree.
Format
show spanning-tree mst port summary
<mstid> {<slot/
port> | all}
Modes
Privileged EXEC
User EXEC
MST Instance ID
The MST instance associated with this port.
Interface
Valid slot and port number separated by forward slashes.
Type
Currently not used.
STP State
The forwarding state of the port in the specified spanning tree
instance
Port Role
The role of the specified port within the spanning tree.
Link Status
The operational status of the link. Possible values are “Up” or
“Down”.
Link Trap
The link trap configuration for the specified interface.
5.2.6 show spanning-tree mst summary
This command displays summary information about all multiple spanning tree instances in
the switch. On execution, the following details are displayed.
Format
show spanning-tree mst summary
Modes
Privileged EXEC
User EXEC
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
