Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
12-6
Port-Channel/LAG (802.3ad) Commands
v1.0, February 2007
12.2 Port-Channel Show Commands
This section describes the commands you use to view port-channel status and
configuration information.
12.2.1 show port-channel
This command displays the static capability of all port-channels (LAGs) on the device as
well as a summary of individual port-channels.
Format
show port-channel
Modes
Privileged EXEC
User EXEC
Static Capability
This field displays whether or not the device has static capa-
bility enabled.
For each port-channel the following information is displayed:
Name
This field displays the name of the port-channel.
Link State
This field indicates whether the link is up or down.
Mbr Ports
This field lists the ports that are members of this port-chan-
nel, in
<slot/port>
notation.
Active Ports
This field lists the ports that are actively participating in this
port-channel.
12.2.2 show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
show port-channel {<logical slot/port> | all}
Modes
Privileged EXEC
User EXEC
Logical Interface
Valid slot and port number separated by forward slashes.
Port-Channel
Name
The name of this port-channel (LAG). You may enter any
string of up to 15 alphanumeric characters.
Link State
Indicates whether the Link is up or down.
Admin Mode
May be enabled or disabled. The factory default is enabled.
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
