Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
System Maintenance Commands
15-19
v1.0, February 2007
15.2.7 clear port-channel
This command clears all port-channels (LAGs).
Format
clear port-channel
Mode
Privileged EXEC
15.2.8 clear traplog
This command clears the trap log.
Format
clear traplog
Mode
Privileged EXEC
15.2.9 clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format
clear vlan
Mode
Privileged EXEC
15.2.10 copy
The
copy
command uploads and downloads files to and from the switch. You can upload
and download files from a server by using TFTP, Xmodem, Ymodem, or Zmodem.
Format
copy
<source> <destination>
Mode
Global Config
Replace the
<source>
and
<destination>
parameters with the options in
Table 15-1
. For
the
<url>
source or destination, use one of the following values:
xmodem | ymodem | zmodem | tftp://<ipaddr>/<filepath>/<filename>
For TFTP, the
<ipaddr>
parameter is the IP address of the server,
<filepath>
is the path
to the file, and
<filename>
is the name of the file you want to upload or download.
Table 15-1. Copy Parameters
Source
Destination
Description
nvram:clibanner
<url>
Copies the CLI banner to a server.
nvram:errorlog
<url>
Copies the error log file to a server.
nvram:log
<url>
Copies the log file to a server.
nvram:script
<scriptname>
<url>
Copies a specified configuration
script file to a server.
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
