Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
15-22
System Maintenance Commands
v1.0, February 2007
15.3 Logging Commands
This section describes the commands you use to configure system logging, and to view
logs and the logging settings.
15.3.1 logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default
disabled; critical
Format
logging buffered
Mode
Global Config
15.3.1.1 no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode
Global Config
15.3.2 logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default
enabled
Format
logging buffered wrap
Mode
Privileged EXEC
15.3.2.1 no logging wrap
This command disables wrapping of in-memory logging and configures logging to stop
when the log file capacity is full.
Format
no logging buffered wrap
Mode
Privileged EXEC
Summary of Contents for GSM7224 - Switch
Page 4: ...v1 0 February 2007 iv...
Page 20: ...xx v1 0 February 2007...
